Frequency Bands list in NR (5G)

-

Home               LTE              NB-IoT             5G(NR-NSA)



FR1 Band list (Sub6GHz):

Band number
Duplex mode
DL operating band
UL operating band
Channel bandwidths(MHz)
 SCS-15 Khz
 SCS-30 Khz
 SCS-60 Khz
n1
FDD
2110 – 2170 MHz
1920 – 1980 MHz
5,10,15,20
10,15,20
10,15,20
n2
FDD
1930 – 1990 MHz
1850 – 1910 MHz
5,10,15,20
10,15,20
10,15,20
n3
FDD
1805 – 1880 MHz
1710 – 1785 MHz
5,10,15,20,25,30
10,15,20,25,30
10,15,20,25,30
n5
FDD
869 – 894MHz
824 – 849 MHz
5,10,15,20
10,15,20
NA
n7
FDD
2620 – 2690 MHz
2500 – 2570 MHz
5,10,15,20
10,15,20
10,15,20
n8
FDD
925 – 960 MHz
880 – 915 MHz
5,10,15,20
10,15,20
NA
n20
FDD
791– 821MHz
832 – 862 MHz
5,10,15,20
10,15,20
NA
n28
FDD
758 – 803 MHz
703 – 748 MHz
5,10,15,20
10,15,20
NA
n34
TDD
2010-2025 MHz
2010-2025 MHz
5
NA
NA
n38
TDD
2570 – 2620 MHz
2570 – 2620 MHz
5,10,15,20
10,15,20
10,15,20
n40
TDD
2300-2400MHz
2300-2400MHz
5,10,15,20,25,30,40,50
10,15,20,40,50,60,80,100
10,15,20,40,50,60,80,100
n41
TDD
2496 – 2690 MHz
2496 – 2690 MHz
10,15,20,40,50
10,15,20,40,50,60,80,100
10,15,20,40,50,60,80,100
n48
TDD
3550-3700 MHz
3550-3700 MHz
5,10,15,20 ,40,50
10,15,20,,40,50,60,80,100
10,15,20,,40,50,60,80,100
n50
TDD
1432 – 1517 MHz
1432 – 1517 MHz
5,10,15,20,40,50
10,15,20,40,50,60,80
10,15,20
n51
TDD
1427 – 1432 MHz
1427 – 1432 MHz
5
NA
NA
n66
FDD
2110 – 2200 MHz
1710 – 1780 MHz
5,10,15,20
10,15,20,40
10,15,20,40
n70
FDD
1995– 2020 MHz
1695 – 1710 MHz
5,10,15,20,25
10,15,20,25
10,15,20,25
n71
FDD
617 – 652 MHz
663 – 698 MHz
5,10,15,20
10,15,20
NA
n74
FDD
1475 – 1518 MHz
1427 –1470 MHz
5,10,15,20
10,15,20
10,15,20
n75
SDL
1432 – 1517 MHz
N/A
5,10,15,20
10,15,20
10,15,20
n76
SDL
1427 – 1432 MHz
N/A
5
NA
NA
n77
TDD
3.3 – 4.2 GHz
3.3 – 4.2 GHz
10,20,40,50
10,20,40,50,60,80,100
10,20,40,50,60,80,100
n78
TDD
3.3 – 3.8 GHz
3.3 – 3.8 GHz
10,20,40,50
10,20,40,50,60,80,100
10,20,40,50,60,80,100
n79
TDD
4.4 – 5.0 GHz
4.4 – 5.0 GHz
140,50
40,50,60,80,100
40,50,60,80,100
n80
SUL
N/A
1710 – 1785 MHz
5,10,15,20,25,20
10,15,20,25,20
10,15,20,25,20
n81
SUL
N/A
880 – 915 MHz
5,10,15,20
10,15,20
NA
n82
SUL
N/A
832 – 862 MHz
5,10,15,20
10,15,20
NA
n83
SUL
N/A
703 – 748 MHz
5,10,15,20
10,15,20
NA
n84
SUL
N/A
1920 – 1980 MHz
5,10,15,20
10,15,20
10,15,20


FR2 Band list (mmWave):

Band number
Duplex mode
f(GHz)
DL operating band
UL operating band
Channel bandwidths(MHz)
n257
TDD
28
26.5 –29.5 GHz
26.5 –29.5 GHz
50,100,200,400
n258
TDD
26
24.25 – 27.5 GHz
24.25 – 27.5 GHz
50,100,200,400
n260
TDD
38
37–40 GHz
37–40 GHz
50,100,200,400
n261
TDD
28
27.5-28.35 GHz
27.5-28.35 GHz
50,100,200,400





NR-ARFCN:

NRARFCN values for each operating band, Step size and ARFCN range are different for each band.


 NR-ARFCN per operating band in FR1 (38.104  Table 5.4.2.3-1)
NR Operating Band ΔFRaster  Uplink Range of NREF Downlink Range of NREF
(First – <Step size> – Last) (First – <Step size> – Last)
n1 100 kHz 384000 – <20> – 396000 422000 – <20> – 434000
n2 100 kHz 370000 – <20> – 382000 386000 – <20> – 398000
n3 100 kHz 342000 – <20> – 357000 361000 – <20> – 376000
n5 100 kHz 164800 – <20> – 169800 173800 – <20> – 178800
n7 15 kHz 500001 – <3> – 513999 524001 – <3> – 537999
n8 100 kHz 176000 – <20> – 78300 185000 – <20> – 192000
n20 100 kHz 166400 – <20> – 172400 158200 – <20> – 164200
n28 100 kHz 140600 – <20> – 149600 151600 – <20> – 160600
n38 15 kHz 514002 – <3> – 523998 514002 – <3> – 523998
n41 15 kHz 499200 – <3> – 537999 499200 – <3> – 537999
n50 100 kHz 286400 – <20> – 303400 286400 – <20> – 303400
n51 100 kHz 285400 – <20> – 286400 285400 – <20> – 286400
n66 100 kHz 342000 – <20> – 356000 422000 – <20> – 440000
n70 100 kHz 339000 – <20> – 342000 399000 – <20> – 404000
n71 100 kHz 132600 – <20> – 139600 123400 – <20> – 130400
n74 100 kHz 285400 – <20> – 294000 295000 – <20> – 303600
n75 100 kHz N/A 286400 – <20> – 303400
n76 100 kHz N/A 285400 – <20> – 286400
n77 15 kHz 620000 – <1> – 680000 620000 – <1> – 680000
n78 15 kHz 620000 – <1> – 653333 620000 – <1> – 653333
n79 15 kHz 693333 – <1> – 733333 693333 – <1> – 733333
n80 100 kHz 342000 – <20> – 357000 N/A
n81 100 kHz 176000 – <20> – 183000 N/A
n82 100 kHz 166400 – <20> – 172400  N/A
n83 100 kHz 140600 – <20> –149600 N/A
n84 100 kHz 384000 – <20> – 396000 N/A
n86 100 kHz 342000 – <20> – 356000 N/A


 NR-ARFCN per operating band in FR2 (38.104  Table 5.4.2.3-2)
NR Operating Band
ΔFRaster
Uplink and Downlink Range of NREF
(First – <Step size> – Last)
n257
60 kHz
2054167 – <1> – 2104166
120 Khz
2054167 – <2> – 2104165
n258
60 kHz
2016667 – <1> – 2070832
120 Khz
2016667 – <2> – 2070831
n260
60 kHz
2229167 – <1> – 2279166
120 Khz
2229167 – <2> – 2279165
n261
60 Khz
2070833 – <1> – 2084999
120 Khz
2070833 – <2> – 2084999




Comments

Post a Comment

Popular posts from this blog

5G Deployment Option-3/3a/3x

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA)   Hi Guys today we are learning about 5G deployment options, if you want to know more about other 5G deployment option please  click here Option 3: EN-DC (EUTRA-NR Dual Connectivity) Option 3 represents a network having both LTE and NR radio access, but using only the EPC core of LTE to route the Control signals. In this option, LTE is used as the control plane anchor for NR, and both LTE and NR are used for user data traffic.(user plane). It could also be called as Non-Standalone (NSA) NR in Evolved Packet System. The only difference between Options 3 and 3A is based on whether the user plane data is sent to NR directly or via the LTE RAN. This standardization was concluded in 3GPP Rel-15. This is a possible first step in the migration towards 5G-SA. This option will be most attractive for operators which have early deployments of 5G NR access systems in areas where legacy eNB and EPC a
Read more

Soft Handover vs Hard Handover

-
Home                 LTE                NB-IoT            5G(NR-NSA) Now before we move to other things like measurements in handover, handover decision, handover procedure, handover interruption time, and mobility robustness optimization, let us take a look into difference between soft handover and hard handover. Soft Handover Hard Handover The handover in which radio links are added and removed in a way that MS always keeps at least one radio link to the UTRAN is known as soft handover. The handover in which all the old radio links in MS are removed before the new radio links are established is known as hard handover. This can also be simplified as make before break This can also be simplified as break before make As call drop rate is lower this handover is used to lower the rate of call drop. In this case higher rates of call drops are found Why soft handover is not included
Read more

DRX (Discontinuous Reception)

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA)   What is DRX and DRX active period? What channels does it monitor in active period? Data transmission between UE and their base stations(eNodeB) uses radio frames with10ms duration, where in each radio frame consists of 10 1ms( 1 frame=10ms duration=10 subframe) subframes. Physical Downlink Control Channel (PDCCH) at the beginning of each subframe indicates whether there is data for UE to receive or not. Devices has to monitor these PDCCHs in each subframe so that it can find out whether they carry any data to receive. Because devices do not receive data in every subframe, this monitoring process naturally leads to high battery consumption.  What is the purpose of DRX? The main purpose of DRX is to lower battery consumption when there is no UL/DL data. means, when there is no traffic(DL/UL) that time devices enter into sleep mode (with RF module turned off) for some period of time as configured by
Read more

Authentication in LTE

-
Home                 LTE                NB-IoT            5G(NR-NSA)   What is Authentication and what type of Authentication is used in LTE? Authentication is a process by which both the UE and Network check whether the other party is authorized to communicate with them. In LTE and WCDMA, a mutual authentication process is used i.e. the Network checks whether the UE is authorized to camp on it and the UE also checks whether it is trying to camp on is the correct Network. The UE becomes authorized to camp on a network by subscribing to the network. In LTE, EPS AKA i.e. Authentication Key Agreement procedure is used for Mutual Authentication. Why is Authentication required from both sides in LTE? The UE needs to be authenticated by the NW to check whether it has subscribed to the NW or not. Only UEs which have a valid subscription should be allowed to camp on the NW. The NW should also be authenticated by the UE because if the UE does not check its
Read more

5G abbreviations

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA)   As per readers request this article is based on some 5G abbreviations (PCell,spCell,Scell,PSCell,MCG.SCG,Master-Node,Secondary-Node) for better understanding. What is Master Node? Master node:  The node (radio access node) that provides the control plane connection to the core network in case of multi radio dual connectivity (MR-DC). For example, it can be master eNB in EN-DC, a Master ng-eNB in NGEN-DC What is Secondary Node? Secondary node:   the radio access node, with no control plane connection to the core network, providing additional resources to the UE in case of MR-DC. For example, It may be an en-gNB in EN-DC or a Secondary ng-eNB (in NE-DC). What is MCG? MCG: Master Cell group It is a group of serving cells associated with the Master Node, comprising of the PCell   and optionally one or more Scells.  (see figure shown above) MCG and SCG are concepts under
Read more

DC Carrier in NR

-
Image
Home                 LTE                NB-IoT               5G(NR-NSA) In this article, we will learn the basics of DC Carrier and why it is needed. Why in NR, DC subcarrier is not reserved like LTE? With legacy LTE (4G) it was decided that all devices (UE) should be capable of the maximum carrier bandwidth of 20MHz (UE can also support 10/15/5/3 MHz). This was a reasonable assumption at the time given the relatively modest bandwidth compared to NR, Whereas NR is designed to support very wide bandwidths up to 400MHz (for FR2) and 100Mhz (for FR1) for a single carrier. As well as NR supports multiple numerologies on the same transmitted carrier frequency. It is not necessary that all devices can support up to 400 MHz Bandwidth, hence in NR BWP concept is introduced. (To learn more about BWP Click here ). Note: in the above and below NR case figure, we assume that for each and every BWP have configured some  txDirectCurrentLocation  value.     As shown in the a
Read more

5G Deployment Option-7/7a/7x

-
Image
Home                 LTE                NB-IoT            5G(NR-NSA) Hi Guys today we are learning about 5G deployment options, if you want to know more about other 5G deployment option please  click here Option 7: Deployment Option 7 represents a deployment scenario in which the Next Generation Core (NGC) will be used with a mixture of LTE and NR radio.  Next Generation signaling will be used but it will be routed via the LTE RAN because the LTE network is more fully built out and thus more reliable for handling signaling.  Options 7 and 7a differ on whether the user plane data is sent to NR directly or via the LTE RAN. 7/7A/7X require an eLTE upgrade of the existing LTE network at the start. (Difference is UP path Non Standalone ( Dual Connectivity 4G/5G ) Option 7/7A: NSA NR in 5GS. This option is particularly attractive for areas in which legacy LTE eNBs and the EPCs are ready to be upgraded to ngeNBs and the 5GCs.  From the point of
Read more